The full guide

Setting up Ryvo.

Everything from a bare Fire TV to watching. About ten minutes.

Before you start

Have your provider's details ready.

A server address, username and password, or a library link. They're usually in your provider's welcome email. Ryvo can't supply them.

Downloader code

5072045

Type this into Downloader on your Fire TV, or search Ryvo in the Amazon Appstore.

Ryvo is a player, not a provider. You bring the service you already pay for.

Step 1 · Phone or computer · 2 min

01

Create your account and start your free trial

Do this part first. Your licence key lives on your account, and the TV will ask for it in step 3.

1. Go to:

www.ryvo.uk

2. Press Sign in, then switch to Create account. You need an email address, a password and your name.

3. Once you are in, choose the Free Trial. It is the first card in the plan list. You should see:

On screenYour 2-day free trial is live. Your licence key is on this page — enter it on your Fire TV and everything is unlocked.

4. Your key now appears at the top of the page, with a Copy button next to it. It looks like this:

RYVO-XXXX-XXXX-XXXX-XXXX

Twenty-four characters, four groups of four, hyphens included. Write it down or keep the page open: you are about to type it with a remote control.

If you cannot see a key

If the page says "Start the free trial to get one" instead of showing a key, the trial has not started yet. Go back and press the Free Trial card. There is no key until a plan is running, and nothing is emailed to you: it appears on the page straight away.

Step 2 · On the TV · 3 min

02

Install Ryvo on your TV

The quickest route is the Amazon Appstore. On your Fire TV, search for Ryvo, install it there, and skip straight to step 3.

If you would rather not use the Appstore, or you are on a device that does not have it, Ryvo also installs through Downloader, a free, well-known app that Fire TV owners use for exactly this.

1. On your Fire TV, search for Downloader (the orange icon, by AFTVnews) and install it. If you already have it, open it.

2. The first time you use Downloader, Fire TV may ask you to allow installing apps from unknown sources. Follow the prompt it gives you. It walks you to the right setting and back.

3. In Downloader's address box, type this code and press Go:

5072045

4. It downloads Ryvo, then asks you to Install. Press Install, then Open.

That is the whole installation. Nothing is plugged in, no computer is involved, and you never need that code again unless you set up another TV.

Step 3 · On the TV · 1 min

03

Unlock it with your key

Ryvo opens on its licence screen:

On screenPlease enter your licence key

Type the key from step 1 using the remote. The hyphens are part of it. Then choose Unlock Ryvo.

It checks with Ryvo and unlocks straight away. A trial or a paid plan shows as Unlocked; a lifetime key says Unlocked — Lifetime.

You only do this once per TV. Ryvo remembers it.

Step 4 · On the TV · 2 min plus loading

04

Add your provider

Next comes Add your provider:

On screenEnter your provider login, or the address of your personalised library.

There are two ways in. Use whichever your provider gave you. If you have both, the library link is quicker, because it is one thing to type instead of three.

Option A: a provider login. Fill in:

  • Server address, for example http://line.example.com:8080
  • Username
  • Password

The server address usually needs a port on the end: the :8080 part. Check your welcome email; it is the most common thing to get wrong. You do not need to worry about the rest: if you paste in a longer address with /player_api.php on the end, Ryvo trims it for you, and if you leave off http:// it adds it.

Option B: a library link. One field. Paste the whole address, which will look something like:

http://line.example.com:8080/get.php?username=…&password=…
The one that catches everybody

Underneath the fields is a tick box: "I am authorised to use this source." The Connect button stays greyed out until you tick it. If you have filled everything in and Connect will not press, this is why, not a fault.

Now press Connect. A large provider can take a minute or two and Ryvo says so on screen. Leave it running rather than going back.

Your details are stored on that TV only.

When it finishes, your library is in. You can check any time under Settings → Connection, which shows Connected along with the server and username it is using.

Step 5 · On the TV

05

Finding your way around

Five places, along the right-hand side:

HomeCarries on where you left off, across every TV on your account.
VisioThe live guide: every channel with what is on now and next, a progress bar for each, and categories you can filter down.
On DemandFilms and box sets, sorted automatically with artwork and descriptions. Series are grouped by season.
SavedAnything you have kept for later.
SettingsYour connection, your library, playback, subtitles, display and your licence.

While something is playing, the remote hints are on screen: OK for information, ◀ opens Visio over the top without stopping playback, ▲▼ moves through the listing, and Back exits.

Step 6

06

More TVs, and your phone

Another TV. Repeat steps 2 to 4 on it, using the same licence key. One key covers every set your plan allows. There is nothing extra to buy or generate, and no second code to remember. How many you get depends on your plan; see step 8.

On a phone or tablet. Ryvo has an Android app with the same library and guide, plus a full remote for the TV: swipe up to throw something onto the big screen. Install it from:

www.ryvo.uk/m

Sign in with the same account. Continue Watching follows the account, not the box it started on.

Step 7

07

If something goes wrong

Ryvo tells you what happened rather than just failing. Find the message you saw:

That key looks too short — check it against your account.Part of the key is missing. It is 24 characters: RYVO- then four groups of four, hyphens included.
That key isn't recognised.A character has been mistyped. The letters I and O and the digits 0 and 1 are never used in a key, so anything that looks like one is really something else.
That key has no plan running on it.The key exists but no trial or plan is active. Start the free trial or choose a plan at ryvo.uk, then unlock again.
The plan on this key has run out.Your trial or subscription has ended. Renew on your account page and unlock again. Nothing is lost.
Couldn't reach Ryvo to check that.The TV is not online. Check its network, then try again.
Connect will not pressThe "I am authorised to use this source" box is not ticked. See step 4.
Nothing came back from that provider.Your login was accepted but nothing was returned. Usually a missing or wrong port on the server address, or a line that has expired. Check both with your provider.
Nothing came back from that library link.The link is wrong or has expired. Ask your provider for a fresh one.
Could not connect: …Ryvo could not reach that server at all: wrong address, wrong port, or the provider is down. The rest of the message says which.
A channel will not playTry another channel first. If everything fails, it is the connection or the provider; if only one does, that stream is down at their end.

Still stuck? Email team@ryvo.uk with the message you saw on screen, word for word. That one line usually tells us exactly what happened.

Step 8

08

Plans, and what each one covers

Free trial2 daysOne TV. Nothing to cancel.
Monthly£2.99/moOne TV. Extra sets £1.99 a month each.
Yearly£24.99/yrThree TVs.
Lifetime£49.99 onceFive TVs. Paid once, kept for good.

The free trial is one per account and one per TV. Every plan uses the same single key across all the TVs it covers, and you can change plan at any time from your account page. No advertising, ever.

Ryvo is media-player software. It supplies no channels, films or series, and is not affiliated with any broadcaster, studio, streaming service or provider. You are responsible for the sources you configure and for holding whatever subscriptions or rights they require.